Hot-Selling Street Light Housing manufacturer introduces the maintenance process of stage light housing:
1. Turn on the switch and check whether all the lamps are lit and whether the accessories are defective.
2. With the consent of the customer, mark the location of the furniture in the construction area and move it (lift gently to avoid bumps). Keep the construction area. Furniture that cannot be moved, such as sofas, beds, etc., should be made with a special dust cover Good protection.
3. Set up the ladder frame according to the construction requirements.
4. Take photos of the lamps, remove the lampshades, lamp discs, and crystal accessories of the lamps and place them on the stall one by one.
5. Open the ceiling plate of the lamp to check the load-bearing structure of the top surface.
6. According to the order from top to bottom, first use a slightly moistened towel to clear the dust on the surface of the lamp, select a suitable cleaning agent to further care for the local area that needs to be treated, and then wipe it with a clean dry towel.
7. If the light source is damaged, get the customer’s consent and then replace it with a new light source.
8. Use clean water to clean the crystals and light discs, collect the water marks and replace the connecting pieces that need to be replaced.
9. To clean the cloth lampshade, apply a special cleaning agent to the lampshade, repeatedly brush along the direction of the texture with a soft brush, and then dry it with a vacuum cleaner.
10. Restore the crystal, lamp disc, and lampshade in sequence.
The above content is compiled and shared by LED Street Light Housing | Die-cast Aluminum Light Housing manufacturer , hoping to help those in need.
1. Turn on the switch and check whether all the lamps are lit and whether the accessories are defective.
2. With the consent of the customer, mark the location of the furniture in the construction area and move it (lift gently to avoid bumps). Keep the construction area. Furniture that cannot be moved, such as sofas, beds, etc., should be made with a special dust cover Good protection.
3. Set up the ladder frame according to the construction requirements.
4. Take photos of the lamps, remove the lampshades, lamp discs, and crystal accessories of the lamps and place them on the stall one by one.
5. Open the ceiling plate of the lamp to check the load-bearing structure of the top surface.
6. According to the order from top to bottom, first use a slightly moistened towel to clear the dust on the surface of the lamp, select a suitable cleaning agent to further care for the local area that needs to be treated, and then wipe it with a clean dry towel.
7. If the light source is damaged, get the customer’s consent and then replace it with a new light source.
8. Use clean water to clean the crystals and light discs, collect the water marks and replace the connecting pieces that need to be replaced.
9. To clean the cloth lampshade, apply a special cleaning agent to the lampshade, repeatedly brush along the direction of the texture with a soft brush, and then dry it with a vacuum cleaner.
10. Restore the crystal, lamp disc, and lampshade in sequence.
The above content is compiled and shared by LED Street Light Housing | Die-cast Aluminum Light Housing manufacturer , hoping to help those in need.
コメント